[I] LIME SLAKER CUM-CLASSIFIER

FEATURES

• Much cheaperthan purchasing a slaker and a classifier, separately.
• Two performances in a single unit, Lime Slaking and Classification.
• Counter current system for grit free lime cream.
• Avoids pipe choking and damage to pumps due to grit.
• It is a complete unit with drive.
• Available in two sizes, one for below 1800 tons per day capacity and the other upto 3000 tons per day capacity.
  

[II] VAPOUR VALVE

FEATURES

• Cost of the Valve is much less compared to any standard sluice valves in the market.
• Very light in weight, hence it can be incorporated in a pipeline without expensive staging.
• Grinding for the valves seats is not necessary, hence gives troublefree working and negligible maintenance.
• Can be used as a bend or tee.
• Leak - proof operation, with endless Teflon seat.
• Avaiable in any required size from 200 mm to 1500 mm.

TOP >

[III] SEMI-KENTNERS

Rising film evaporator body has got distinct advantage over conventional body, of having higher heat transfer coefficient and low retention. These bodies can be very well used for thin juices. These can be used as vapour cell and 1st body. Due to high velocity of jiuces, scale formation is minimised.

Due to above advantages of rising film bodies it is possible to have Double Effect Vapour Cell comprising both bodies rising film type. By increasing pressure in the first body to 1 kg + temperature difference is increased and this is distributed in two bodies. Maximum 40 to 45% in juice is achieved in Double Effect Vapour Cell and the load on quadruple is decreased. Thus vapours going to the Condenser are considerably reduced, giving steam economy of 3 to 4% on Cane. At present this is the cheapest source of energy saving at the evaporation level. In the single effect vapour cell, maximum evaporation that can be taken is around 22%. Major evaporation is done at quadruple while in Double Effect Vapour Cell, maximum evaporation is done at Vapour Cell level and lower in quadruple.

Rising Film Evaporator should be an ideal choice for Vapour Cell / 1 Body for the the conventional systems or for various steam saving schemes or for increased Evapotator capacities over the existing arrangement. However, the requirement has to be tailor made and varies from case to case depending upto the existing systems. Semi-kestners are available from 700 m2 H.S. to 1400 m2 H.S. and actual heating surface can be worked-out taking into consideration the existing system.

TOP >